Akro-Mils 64-Drawer Plastic Drawer Storage Cabinet for Garage Organization, Bead Organizer, Building Bricks Storage, Teacher Toolbox, Makeup Organizer, 20-Inch W x 6-Inch D x 16-Inch H, 10164 Black

Just arrived this morning and I can already see that it isn't going to hold everything; not that I thought it would considering the electronics bits and pieces I have. But, this is a start; and my work area is going to thank me for it just as soon as I fill all the drawers. The plastic feels fairly sturdy which leads me to expect it to last a good while. It's kind of deep and will stand out from the wall more than some of the old fashioned organizers. With the deepness comes more storage area in the drawers. For some this is a good thing, for others it might be better to have twice the drawers at half the depth. It all depends on what you need to store. Some of my doo-dads are tiny, but some are larger; and I can use the extra room for the larger items. I could see having a shallower set of drawers for my smaller parts, and maybe that will happen in the future. For now I will fill this unit up and see how things go. You can see from the seller's pictures how deep it is, so you already know if that is going to be an issue. I think it will last a long time, but that is only an opinion at this point in time. I'm not a salesman for this company and I don't know what you are in need of, so it would be difficult for me to tell you to jump in and buy this item. Do what I did: look over the large selection of parts cabinets on Amazon and make a decision. That way you will get the one you chose.

My granddaughter likes making bead bracelets and got a TON of beads for her birthday. Bags and bags and baggggssss of beads. I ordered this before we left her house so that these weren't beads everywhere. It sits on her desk in her room. She loves how she can see all of the colors of the beads from her bed; they make her happy. It also makes it easy for her to plan out a bracelet since she can see what she has before she starts. The drawers are a really good size and hold a lot of beads. They slide easily in and out. The shell is very sturdy and doesn't feel shaky at all. An excellent set.

I needed to upgrade from my old inherited drawers. I liked them but time had worn them and made them brittle. I wasn’t sure about this brand until I realized my grandfathers (the ones I inherited) were the same brand. So I decided to go with this brand over craftsman as a way to remember my grandfather. Slides are easy, drawer deaths is pretty good, it fit my needs, left me satisfied, wasn’t missing parts and THATS WHAT SHE SAID.

The manufacturer neglects to provide these instructions, so here are the only ones you’ll find:<br/><br/>1. Before installation, turn cabinet upside down and dump all 44 drawers into a box or bag.<br/>2. Optional: For full mount strength, some/all of the mounts should be in wall studs. Use a stud finder. If all mounts are on drywall, that’s probably okay, unless you’ll be storing very heavy weight.<br/>3. The distance between the cabinet mounting holes is: horizontal 18-1/4”, vertical: 13-3/4”. Draw pencil marks for the 4 drill holes on the wall. Use a bubble level to verify that your marks are level. Hold the cabinet up to the holes and look to verify that they will fit. The top of each narrow slot (oriented upward) should match its mark exactly.<br/>4. Set the cabinet aside.<br/>5. Pit each mark with an awl or nail.<br/>6. Optional: The mountings are more secure if you use #6 washers. Verify that washers actually fit through the cabinet mounting holes. If washers are large, then you’ll have to drive the screws with the cabinet held up to the mounts, and that goes better with a second pair of hands.<br/>7. To mount on a stud, use #6x1-1/2” pan head phillips screw. You don’t need an anchor. Drill with 1/8” bit. Mounting hardware is not included with the cabinet.<br/>8. To mount on drywall, use #6 nylon self-drilling anchor with #6x1-1/2” pan head phillips screw. Drill with 1/4” bit. Insert each anchor with a screwdriver.<br/>9. Partially drive all screws into anchors/holes. Leave screw heads 1/4” away from wall.<br/>Mount the cabinet over the screws. After mounting, each screw should sit in the upper narrow part of its cabinet slot. If any mount is off by up to 1/8”, that’s probably okay.<br/>10. Place bubble level on top of cabinet to verify it’s level. If it’s not level, this is your chance to rework.<br/>11. Tighten all screws lightly snug, but do not over-tighten, or you WILL break a slot, and that is NOT easy to fix. Recommended: 14” phillips screwdriver.<br/>12. The mounting is done.<br/>13. Reinsert drawers.

Excellent quality, specially good for the classroom teachers who love organization. The drawers are small but perfect to save paper clips, magnets, labels and other small things.

Perfect for organizing all the little things that clutter up a desk or classroom. The drawers are just the right size and don’t slide out too easily. It’s lightweight but surprisingly durable. I love how tidy it’s made my workspace.

I bought these to store my sorted Lego bricks, and they work perfectly providing easy access to find the pieces I need for builds. I will buy more.

The actual drawers and the outer shell are nice. I am upset because I have ordered 2 of these and both times they came without the dividers for the drawers. When I look on the other people's reviews I see they have them but mine came without. I took 2 stars because its inconvenient and limits the use of the drawers for my craft.The review of what I got is its practical and the shell is thinner than other ones I own but seems sturdy enough to carry all the craft pieces I am using it for so it serves its purpose and works as described.