VIVOSingle Monitor Arm Desk Mount, Holds Screens up to 32 inch Regular and 38 inch Ultrawide, Fully Adjustable Stand with C-Clamp and Grommet Base, VESA 75x75mm or 100x100mm, Black, STAND-V001

easy to assemble and install, though the range of movement on the arms could be slightly wider, a proper join in the mid point (i.e. a double joint) would be better. that said assembly took a few minutes, the instructions are good. using the clamp attachment here, it also comes with a plate suitable to mount by drilling through the desk which is a nice touch.includes the fittings to attach to the monitor VESA mount, this is a sensible quick release design so the mounting plate can be fitted to the monitor before adding it to the stand.once installed the design seems sturdy, though note this is intended to hold a monitor in a single location, if you want to be able to swing it back out of the way you will need something else or to fit a collar to the post as the joints are designed to be fitted tight.the post and the arm come with cable clips with is good and avoids needing tie wraps. this has allowed adding a second monitor to a desk without taking up space on the desk itself.the feel is quite heavy with metal construction and it feels robust, currently using with a 24" LCD panel which while not heavy is being held securely

Very high quality been using for a month now and it's still standing. It hold my monitor very well. It looks good and clean. It is a very easy product to install. The value for money is insane. Very worth it.You can move it around pretty easily and it's pretty flexible. And it functions better than what it is worth.

I recently purchased 2 as I decided it was time to use both my monitors (first monitor 27in and second monitor 34in ultra wide curve monitor).It was easy to setup and instructions were easy to follow. The arm handles the first monitor perfectly fine. However it seems the arm is struggling with the weight of the second monitor which has caused then arm to drop down. It is the only reason why I haven't given this a 5 star. Only time will tell if the arm can handle the weight of the second monitor.Overall the product is worth the money and seems to be of good quality.

I use this with a portable monitor for when I'm working from home. The pole comes with 2 options to mount: either with a clamp to the desk; or screwed through the desk. I chose the clamp option and it is absolutely solid when attached.The arm gives lots of flexibility in positioning your monitor and the monitor can tilt into the optimum position.Highly recommended

I bought this to replace an existing arm as I upgraded to a 34" wide screen monitor. Sadly I'm regretting this decision already as there are many negatives to this, both in design and functionality.This mount can be installed as either a clamp or grommet, I initially chose grommet because my desk has a cable hole in it however after installation I felt the monitor was too close to me so I decided to change it to the clamp.The clamp itself is very robust, however the two screws on the back of the clamp that hold the two sections of the clamp together are impossible to release, even though the clamp seems to be adjustable. That aside, I tried to mount it to the desk but the handle for tightening the clamp is so big that it interferes with the modestly panel at the back of my desk making it impossible to get the clamp all the way up against the edge of the desk.There is a design fault in the clamp mechanism, I think one of the other reviewers had theirs break completely, but the clamp uses a plastic, yes plastic washer between the clamp screw and the clamp plate. Fortunately for me, when the mount collapsed, the washer did not break, but if the monitor had been installed at the time then I suspect the whole thing would have gone over. This needs replacing with a metal one urgently in my opinion.Having finally got the mount installed, with the clamp connected the best it could and the monitor attached, it's disappointing that the monitor feels so low. Even though I've got the arm almost at the top of the pole it just isn't high enough. Added to that and despite positioning and tightening the screw as hard as possible, the monitor has a forward tilt, even though the monitor is within the parameters of the mount both for size and weight.I'm really disappointed in this, the only decent thing about it is the fact that it has some cable clips and the clamp is robust but other than that it's quite a let down. That aside, it has design issues that could easily be rectified to make it an easier and safer installation. As it stands, I'm likely to use this for something else and have put my monitor on it's original stand as I just don't trust this to do it's job.

Great product, had a slight issue installing but that was down to my monitor,looks great, free's up alot of space on my desk, I am using a MSI 34" Ultra Wide and it handles it fine,